At Nasir Nickel Alloys in Manama, Bahrain, Inconel 800 Bars are manufactured to deliver exceptional durability and stability in high-temperature and corrosive industrial environments. Engineered from a nickel-iron-chromium alloy, these bars are designed to maintain strength and resist oxidation even when exposed to elevated temperatures for extended periods. Their balanced composition provides superior resistance to carburization and thermal fatigue, making them a dependable choice for demanding applications. Inconel 800 Bars offer long-lasting performance, structural integrity, and reliability in systems where ordinary materials cannot withstand harsh operating conditions.
Inconel 800 Bars are composed of nickel, iron, and chromium in carefully balanced proportions, offering excellent resistance to oxidation, scaling, and high-temperature corrosion. This alloy delivers impressive tensile and yield strength, retaining stability during thermal cycling and prolonged heat exposure. It resists carburization, chloride stress-corrosion cracking, and chemical attack in various industrial environments. These bars maintain good ductility and toughness across a wide temperature range, allowing for reliable performance in applications involving mechanical stress, pressure fluctuations, and aggressive atmospheres.
| Standards : | ASTM B408, ASME SB408 |
| Dimensions : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Wire : | Thickness starting from 0.05mm |
| Round bar size : | Diameter: 3-~800mm |
| Hex Bar size : | 2-100mm A/F |
| Flat bar size : | Thickness: 2 -100mm / Width: 10 to 500mm |
| Square bar size : | 4 to 100mm |
| Rectangular Bars Size : | 33 x 30mm to 295 x 1066mm |
| Hollow Bar : | 32mm OD x 16mm ID to 250mm OD x 200mm ID |
| Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Inconel 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
At Nasir Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Inconel 800 Bar in Manama, Bahrain, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Bahrain, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Inconel 800 Bars are widely utilized in industries where high-temperature resistance and corrosion durability are critical. They are ideal for heat exchangers, boiler components, furnace parts, and petrochemical processing equipment. Power plants rely on these bars in superheater tubes, steam generators, and high-temperature piping. Chemical and refineries use them for reactors, cracking units, and equipment exposed to carburizing or oxidizing conditions. In thermal processing, they are commonly used for heat-treating fixtures and industrial furnaces. Inconel 800 Bars provide reliable, long-term service in demanding environments where heat, pressure, and corrosion challenges are constant.
